Are you stuck with the Linksys router red light? Then this guide is for you. Generally, when the red light on the Linksys router stands longer than usual, then it should be a concern. Additionally, it is crucial to understand the behavior of this LED, like as solid or blinking. After that, you can look for the reasons and troubleshooting tips to resolve it.
Moreover, our informative content piece will highlight the various scenarios of the red light on Linksys router and then take a look at the causes and troubleshooting tips to resolve this problem. Furthermore, walk through this complete post to understand more about the red light issue.
Discussing solid & flashing Linksys router red light
Further, before you look for the reasons and the troubleshooting methods, it is necessary to look at the different behaviors of the red light:
Linksys blinking red
The primary router is not linked to the modem and loose network cable connections.
Solid red LED
There is no internet connection on the router due to local area network outage or other technical errors.
How to fix the Linksys router red light?
Occasionally, the red light on the Linksys router generally occurs because of the network disconnectivity. Likewise, the primary culprits consider damaged LAN/WAN ports, ISP issues, faulty hardware, signal interruptions, etc. Now, it is crucial to resolve this issue after finding out why is my Linksys router red. Additionally, we highlight a few of the effective troubleshooting tips to eradicate this issue. Let’s take a look:
Connect the network cable properly
- First and foremost, check the cable connections as these are tightened enough.
- Ensure cords are linked to the right ports of the modem and the router.
- None of the cables is damaged or tangled.
Approach your ISP authority
- Sometimes the ISP restricted the network access.
- Also, a local area network outage or continuous connection issues cause red light issues
- So, contact your internet network service provider and follow the guidelines.
Eliminate the signal interferences
- However, the presence of signal obstructions around the networking device gives rise to the Linksys router red light issue.
- So, remove these barriers, like mirrors, furniture, microwaves, etc.
- If unable to eliminate these things, then relocate your networking device.
Reboot the Linksys router
- The technical issues and bugs on the Linksys router interrupt its functioning.
- Therefore, it is necessary to power cycle the networking device.
- This will fix the red light problem error on your router.
Check the hardware
- It is necessary to check the router’s hardware.
- If you find LAN/WAN ports damaged, then it is necessary to replace them.
- Also, look for any other damage on the gateway. If unable to change these parts, then it is time to change the networking device.
Upgrade router firmware
- Sometimes outdated or corrupted firmware will lead to a Linksys router red light.
- So, access the admin interface of the router and check for any updates.
- After that, follow the instructions to update Linksys router firmware.
Factory reset the router
- When none of the above-discussed methods work to resolve the issues with your router, then hard reset it.
- To do so, you can opt for the web GUI, app, or Reset button methods.
- After hard resetting the router, reconfigure it from scratch.
In the end
All things considered, this informative guide summarizes the complete information on the Linksys router red light problem. Here, you will understand the behavior of a red light and the reasons behind it. Also, you can find and choose suitable troubleshooting tips to eradicate this problem. Hope, you find this guide helpful to bring your router back to its normal functioning.